ATN

The PS-31 Binocular Night Vision Device (BNVD) is a compact, lightweight, dual tube goggle to replace the legacy PS-15. In a sea of dual tube night vision goggles, the PS-31 is one of the smallest and lightest units by far. The PS31s can be outfitted with various levels of high-performance US made Gen 3 image intensifier tubes. Working directly with U.S. Operators input, the PS-31 was designed to increase system resolution, significantly reduce head borne weight, improve system of center of gravity, provide additional operational utility, and improve overall operator situational awareness and adding a 50 deg FOV for maximum visibility in the field. These tubes are auto gain-capable, allowing the system to adjust the brightness of their image as situations on the ground dictate. The PS-31 BNVD has independently pivoting tube housings that allow the operator to run the goggle in a binocular or monocular configuration. Using two tubes at once allows the eyes to create depth perception and increases the ease in maneuvering terrain and obstacles as well as operating devices such as control panels and door knobs. However, monocular configurations allow for ease in transitioning between various lighting conditions that often occur on the battlefield and cause operators to switch between night vision and weapon-mounted optics. Another benefit to the pivoting tube housings is the ability to mount the “flatten” goggle against the front helmet surface when stowed. The ability to pivot the tube housings against the helmet surface creates an overall lower profile, increasing operator safety and equipment life.

Generation USA Gen 3,

High-Performance, Auto-Gated/Thin-Filmed

Magnification 1 X

Resolution 64-72 lp/mm, A-Grade

FOV 50 °

Total Darkness IR System Yes

Lens System F/1.18

Proshield Lens Coating Yes

Range of Focus 0.25 yard/m to infinity Diopter Adjustment

-5 to +5 Automatic Brightness Control Yes

Bright Light Cut-off Yes

Infrared Illuminator Built-in IR Indicator Yes

Low Battery Indicator Yes

Power Supply 1 x 3V (CR123)

Battery Life 60 h – standard/ 300 h – with Battery Pack (optional)

Finish Matte Black,

Corrosion Resistant,

Fibre re-enforces polycarbonate body Capability Flip-Up On-Off,

Side Flip-Up On-Off

Environmental Rating IP65

Operating Temperature -59°F to +120°F / -51°C to +49°C

Storage Temperature -59°F to +185°F / -51°C to +85°C

Dimensions 4.5" x 7" x 3.5"/115 mm x 178 mm x 85 mm

Weight 1.27 lbs / 0.58 kg

Available for Export No

Country of Origin USA 

By ordering United Survival First Aid Kits (Medical Kits) or other products, you warrant that you have received the proper training and required authorization, if applicable, to use said medical products. United Survival assumes no liability for the misuse of any product or kit. You must know and understand your local/ state laws.

United Survival reserves the right to replace/switch any product with one of equal quality or value at any time at our discretion.

Descriptions on this website (unitedsurvivalstore.com) or any affiliate website are intended only to describe the products, and should not be construed as medical advice. Consult your healthcare provider for any and all medical advice.

WARNING: Cancer and Reproductive Harm

http://www.P65Warnings.ca.gov